Tankless heaters are sold on lasting twice as long as a storage tank — and almost nobody is told what the condition is.
A tankless unit heats water by passing it through a narrow heat exchanger at high temperature. In hard water, minerals precipitate onto those surfaces. Even a thin layer insulates the exchanger — so the unit works harder, delivers less, and eventually triggers error codes and fails.
The maintenance that prevents it is descaling. Annually as a baseline, more in hard water.
It takes about an hour, and it requires isolation valves that should have been fitted at installation.
Most tankless units never get it. People are told "no tank, no maintenance," which is only half right — there's no tank to flush, but there's an exchanger to descale, and neglecting it destroys the very longevity the purchase was justified on.
A neglected tankless heater doesn't last twenty years. It fails early, expensively, and for entirely preventable reasons.
Tap the call button and tell us what you have — and whether it's ever been descaled.
Reliable Plumbing Experts sizes, installs, and services tankless water heaters across Mapleton, MN for homes and businesses.
The exchanger is insulated by scale, so less heat reaches the water. Slow enough that households adjust without noticing — showers get turned up, and everyone assumes that's normal.
Longer waits, and more noticeable temperature swings.
The unit burns more fuel for the same output, continuously.
Temperature faults, flow faults, and overheat protections triggering — the unit protecting itself from conditions scale has created.
On most units, the single most expensive component there is — frequently approaching the cost of replacing the whole heater.
A descaling solution circulated through the heat exchanger, dissolving the mineral deposits, then flushed clear.
A pair of valves either side of the unit that let it be isolated and circulated without draining the system.
They cost very little at installation and are expensive to retrofit — which means a unit installed without them frequently never gets descaled at all, because every service becomes a bigger job than anyone wants to book.
A tankless installation without service valves was done to a price, and the maintenance was never really part of the plan.
Annually as a baseline. More frequently in hard water or heavy commercial use. Considerably less often where the water is softened or filtered — which is why treatment and tankless go together.
Fitting a scale filter or softener where hardness is high protects the exchanger between services and extends the interval substantially.
How much you want at once, across every fixture running simultaneously.
How far the water must be lifted.
Any unit delivers high flow at a small rise, or modest flow at a large one. It cannot do both — and every headline rating is quoted at a rise that flatters it.
Colder incoming water means a bigger lift.
A scaled unit delivers less than its rated output — so a heater sized tightly for your demand and then neglected is short of capacity twice over on the coldest morning of the year.
A tankless unit's input while running far exceeds a storage heater's, and the existing line frequently isn't large enough. An undersized line means the unit never reaches full output — and it behaves exactly like a scaled or undersized heater.
Correctly routed and terminated with proper clearances. Condensing models need appropriate material for acidic condensate — plus condensate drainage.
Minor on gas units. Substantial on whole-house electric.
Where hardness would otherwise destroy it.
Fitted as standard, because the alternative is a unit that never gets serviced.
Output verified at temperature, not just fired and left.
A neglected tankless unit is a worse investment than a storage tank, because you've paid the higher installation cost and thrown away the longer life.
Descaling. It's the condition on the twenty-year service life, and it's the thing nobody mentions at the point of sale.
Without them, descaling becomes a job nobody books — and their absence tells you an installation was done to a price.
Because it's what makes maintenance possible at all.
It extends the descaling interval substantially and protects the exchanger between services.
Both produce reduced output, and they're entirely different corrections.
Including honestly, where annual servicing isn't going to happen — a neglected tankless unit is a worse investment than a tank.
Licensed, insured, and background-checked plumbers serving Mapleton, MN.
You'll have the sizing calculation, a fully itemised quote, and a realistic maintenance requirement before anything is ordered.
Reliable Plumbing Experts proudly serves Mapleton, MN and the surrounding neighborhoods, sizing, installing, and servicing tankless water heaters for domestic and commercial properties throughout the area. Unsure whether you're in range? Call and ask.
Click Here To Call Number(833) 435-3258Half right. There's no tank to flush, but there is a heat exchanger to descale — and that's the maintenance the long service life depends on entirely. "No tank, no maintenance" is the most costly misunderstanding in this category.
Circulates a descaling solution through the heat exchanger to dissolve mineral deposits, then flushes it clear. About an hour. Without it, scale insulates the exchanger, output falls, running cost rises, error codes appear, and eventually the exchanger fails.
Output drops so gradually that households adjust without noticing. Then error codes start. Then the heat exchanger fails — the most expensive component in the unit, frequently approaching the cost of the whole heater. And the long life you paid extra for never materialises.
Annually as a baseline, more frequently in hard water or heavy commercial use, and considerably less often where the water is softened or filtered.
A pair of valves either side of the unit that allow it to be isolated and circulated without draining the system. They cost very little at installation and are awkward to retrofit — which is why a unit fitted without them frequently never gets serviced at all.
Yes, and it's worth doing, because it's what makes annual descaling practical rather than a bigger job nobody books.
Usually scale on the exchanger, which is reversible if caught. Sometimes a gas supply that was marginal from the start — an undersized line behaves exactly like a scaled unit. Both need checking rather than assuming.
Substantially. It's the primary factor in how often descaling is needed, and fitting treatment or a scale filter where hardness is high protects the exchanger between services and extends the interval considerably.
Honestly, probably not. You'd be paying a higher installation cost for a longer service life you then throw away. A storage tank is the better investment for a household that won't book annual servicing.
Colder incoming water means a bigger temperature rise, and flow trades against rise. A scaled unit compounds it — sized tightly for your demand and then neglected, it's short of capacity twice over on the coldest morning.
Yes. An annual descale is a genuine ongoing cost and it belongs in the arithmetic from day one. Any comparison that ignores it is optimistic.
Not necessarily under time pressure. Tankless needs sizing, gas checks, venting design, and commissioning — and a failed tank is a poor moment to make a twenty-year decision.
The twenty-year service life is real, and it's the entire justification for the higher installation cost. It's also conditional on an hour of descaling a year — through valves that should have been fitted at installation and frequently weren't, on a schedule nobody was told about.
Reliable Plumbing Experts fits service valves as standard, will retrofit them to somebody else's installation, fits treatment where hardness warrants it, and tells you plainly when a storage tank is the better investment.
Tap the call button and tell us what you have — and whether it's ever been descaled.
Click Here To Call Number(833) 435-3258